Shenzhen Jingkechuang Electronic Equipment Co

There are currently a wide variety of reflow oven temperature testers on the market. When users need to buy them, users who are not familiar with them really don’t know which brand to buy? What model of furnace temperature tester? Today I will discuss with you how to correctly choose an oven temperature tester for reflow soldering and wave soldering. I hope you will not waste money when encountering similar situations in the future.
The reflow oven temperature tester is mainly used to detect the temperature uniformity of the reflow oven and the circuit board when passing through the reflow oven. Generally, the number of temperature points detected is directly related to the size of the circuit board. Generally, the temperature measurement is used for large boards. More points are enough, and fewer temperature measurement points on the small board are enough. Take a piece of paper as an example. If it is smaller than the paper, it is recommended to use one measuring point or less. If it is larger than the paper, you can use one or more points. The current light strip is connected to the board. Larger, if users need to measure temperature, they can choose a furnace temperature tester with more temperature measurement points. Well, there are now some users who often do not choose a furnace temperature tester based on their actual needs, but based on the introduction of peers or the brand used by customers. When receiving customer consultations, the editor found that originally only needed A furnace temperature tester with a temperature measuring point or less is enough, but the editor needs to provide an instrument with a temperature measuring point. The price of the furnace temperature tester of foreign brands has doubled. Think about it, there are more than one temperature measuring point. The price of temperature measuring points is twice as high. Isn’t this a waste of corporate funds? This is also a phenomenon of following the trend. I will use whatever brand the customer uses, so that the measured results will not cause any problems for the customer. Wrong The results measured by the same model of furnace temperature tester in different furnaces may not be the same. The editor believes that as long as the accuracy of the instrument is the same, the results measured by any brand of instrument will be correct. A few standards are provided for colleagues' reference when choosing. First, the number of channels of the furnace temperature tester required, that is, the temperature measurement points.
Second, choose a relatively well-known brand. The ones you search on the Internet may not necessarily be well-known, but they just spend money on advertising. You can ask engineers for relevant understanding. They are on the front line. They have the right to speak, stability and reliability, and they know more comprehensively.
Third, please confirm the price of the accessories with the supplier when purchasing. Some accessories are very expensive, resulting in high subsequent maintenance costs for users, such as thermocouples, thermal insulation boxes, data cables, batteries, etc.
Fourth, cost-effectiveness. Furnace temperature testers with similar brand recognition, the same number of channels, and the same accuracy standards, see if their prices have certain advantages. I believe that the one that is not the most expensive is the best, and the one with the highest cost performance is our choice.

The above is a reference provided by
Shenzhen Jingke Chuang Electronic Equipment Co., Ltd.
for everyone
I hope that customers can buy a furnace suitable for their own company. Temperature tester
Furnace temperature tester